Bondeye Photochromatic Demonstrator (New)

Photochromic Tester

• Suitable for quickly checking and demonstrating the photochromatism of lenses
• Suitable for quickly testing the UV protection of lenses
• Suitable for quickly testing the BLUE LIGHT protection of lenses
• Option of automatic switch off after 10 seconds
• Soft and white work area designed to help opticians handling and checking lenses
• Fit for polymerizing UV glue

PHOTOCHROMIC TREATMENT TEST

• Place the lenses below the UV LEDs and press the “10s” button or the “on/off” button to activate the photochromic function of the lenses.
• The photochromic lenses will immediately begin to darken.
• Use the soft surface to check the result obtained.
• This process does not alter the photochromic properties of the lenses.

“UV” RAYS PROTECTION TREATMENT TEST
Press the on/off button; by placing the lens or glasses between the UV LEDs and the irradiated red writing “TEST UV”, the latter disappears if the lens is treated with UV. protection; if UV rays pass through the lens, the writing remains visible as much as the amount of UV rays passing through.

“BLUE LIGHT” RAYS PROTECTION TREATMENT TEST
By holding down the blue light button, and placing the lens or glasses between the blue light cone and the plane ; the blue light will disappear if the lens has blue light protection; if the blue light passes through the lens, the circle of blue light will remain visible as much as the amount of UV rays passing through.

UV GLUES CURING
After applying UV glue, place the product under the UV light and allow the glue to cure. Curing / Polymerization times depend on the type of UV glue used.

• Measurements: 240x180x95mm | Weight: 1.3kg | 395m UV leds - 405m Blue light
• Power Supply: Jack 5.5-2.1cc | input: 100/240V 50/60Hz 0.5A Max | Output: 12V 1.0A 12W
• CE conformity | 3 years warranty